|
Journal Publications
1. Espinasse, L., Keer, L. M., Yu, H., Borodich,
F., Wang., Q., “A Note on JKR and DMT Theories
of Contact on a Transversely Isotropic Half-Space,” to appear in Mechanics of Materials.
2. Xu, H., Chen, W. W, Zhou, K., Huang, Y., and
Wang, Q., 2009, “Temperature Field Computation for a Rotating Cylindrical
Workpiece under Laser Quenching,” International Journal of Advanced
Manufacturing Technology, DOI: 10.1007/s00170-009-2206-5.
3. Jin,
X., Keer, L.M., and Wang, Q., “New Green's Function for Stress Field
and a Note of Its Application in Quantum-Wire Structures,” International
Journal of Solids and Structures, 10.1016/j.ijsolstr.2009.07.005.
4. Bai, X. M., Keer, L.M., Wang, Q., and Snurr,
R. Q., “Investigation of
Particle Damping Mechanism via Particle Dynamics Simulations,” to
appear in Granular Matter.
5. Zhu, D., Ren, N.,
and Wang, Q., “Pitting Life
Prediction Based on 3-D Line Contact Mixed EHL Analysis and Subsurface von
Mises Stress Calculation,” to appear in Journal of Tribology.
6. Shah, B.M., Pillet, D., Bai, X.M, Keer, L.M.,
Wang, Q., Snurr, R., 2009, “Construction and Characterization of a
Particle-Based Thrust Damping System,” Journal of Sounds and Vibration, Vol. 326, pp. 489-502, DOI 10.1016/j.jsv.2009.06.007.
7. Cao,
J., Zhou, R, Wang, Q., Xia, Z.C., 2009, “Strip-on-Cylinder Test
Apparatus for Die Wear Characterization”, Annuals of the CIRP,
Vol.58/1, DOI 10.1016/j.cirp.2009.03.098.
8. Hsieh,
P. Y. Persad,
C. Ghosh, G. Chung,
Y.-W. Wang, Q., 2009, “Mechanism of Porosity
Formation in Transfer Films in Electromagnetic Launchers,” IEEE Transactions on Magnetics,
Volume: 45 (1), Part 2, pp. 319-321.
9. Chen,
W., W., Kim, W., and Wang,
Q., 2009, “Transient Thermomechanical Analysis of Sliding Electrical
Contact of Elasto-Plastic Bodies, Thermal Softening and Melting Inception,” Journal of Tribology, Vol. 131, pp. 021406-1-10.
10. Wang,
F., Block, J., Chen, W., W., Martini, A., Keer, L.M., and Wang, Q., 2009, “A
Multi-Scale Model for the Simulation and Analysis of Elasto-Plastic Contact
of Real Machined Surfaces,” Journal
of Tribology, Vol. 131, pp 021409-1-6.
11. Jin,
X., Hasebe,
N., Keer, L. M., and Wang, Q., 2009, “A Comparative Study of Modeling
the Magnetostatic Field in a Current-Carrying Plate
Containing an Elliptic Hole,” to appear in IEEE Transactions on Magnetics.
12. Chen, W., W. and Wang, Q., 2009, “A
Numerical Static Friction Model for Spherical Contacts of Rough Surfaces,
Influence of Load, Material, and Roughness,” Journal of Tribology, Vol.
131, 021402-1-8.
13. Zhou,
K., Chen, W, W, Keer, L. M., and Wang, Q., 2009, “A Fast Method for
Solving Three-Dimensional Arbitrarily-Shaped Inclusions in a Half Space, Computer Methods in Applied Mechanics and
Engineering, Vol. 198, pp 885-892.
14. Jiang,
Z. Y., Xiong, S. W., Tieu,
A. K., and Wang, Q., 2008, “Modeling of the Effect of Friction on Cold
Strip Rolling,” Journal of
Materials Processing Technology, Vol. 201, pp. 85-90.
15. Hasebe, H., Jin, X., Keer, L. M., and Wang,
Q., 2008, “Electromagnetic Fields Induced by Electric Current in an
Infinite Plate with an Elliptical Hole,” Quarterly Journal of Mechanics
and Applied Mathematics. 2008; 61(4): 615-633.
16. He, B. Chen, W, and Wang, Q., 2008,
“Surface Texture Effect on Friction of A Micro-Textured Poly(dimethylsiloxane)
(PDMS),” Tribology Letters, Vol.
31, pp 187-197.
17. Ren, N, Zhu, D., Chen, W., W., Liu, Y., and
Wang, Q., 2009, “A Three-Dimensional Deterministic Model for Rough
Surface Line-Contact EHL.” Journal of Tribology, Vol. 131, pp. 011501-1-9.
18. Hao, S., Wang, Q., and Keer, L. M., 2008, “A Mechanical Approach to
Solve Two-Dimensional Static Electrical and Magnetic Fields and Applications
to Contact between Conductors under Electrical Load,” to appear in Journal of Applied Mechanics.
19. Bai, X., Shah, S., Keer, L.M., Wang, Q., Snurr, R., 2008, “Particle Dynamics Simulations of
a Piston-Based Particle Damper” to
appear in Powder Technology.
20. Chen, W. W and Wang, Q., 2008, “A Numerical
Model for the Point Contact of Dissimilar Materials Considering Tangential
Tractions,” Mechanics of
Materials, Vol. 40, pp. 936-948.
21. Liu, G., Liu, T., Xie,
Q., and Wang, Q., 2008, “Two-Dimensional Steady-State Thermal
Elasto-Plastic Contact of Rough Surfaces,” IMechE
Part J, Journal of Engineering
Tribology, Vol. 222, pp. 843-855.
22. Chen, W. W. and Wang. Q., 2008, “ Thermomechanical Analysis of Elasto-Plastic Bodies
in a Sliding Spherical Contact and the Effects of Sliding Speed, Heat
Partition, and Thermal Softening,” Journal
of Tribology, Vol. 130, pp. 041402-1-10.
23. McCain, M., He, B., Sanati,
J., Wang, Q. Marks, T., 2008, “Aerosol-Assisted Chemical Vapor
Deposition of Lubricating MoS2 Films. Ferrous Substrates and Titanium Film
Doping" Chemistry of Materials,
Vol. 20, pp 5438-5443.
24. Martini, A., Roxin, A., Snurr, R. Q., Wang, Q. and Lichter, S., 2008,
“Molecular Mechanisms of Liquid Slip,” Journal of Fluid Mechanics, Vol. 600 (2008), pp. 257-269.
25. Nanbu, T, Ren, N., Yasuda, Y., Zhu, D., and Wang,
Q., 2008, “Micro
Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture
Bottom Shape and Surface Relative Motion,” Tribology
Letters, Vol. 29, 241
– 252..
26. Liu, Y, Zhu, D., and Wang, Q., 2008,
“Effect of Stiff Coatings on EHL Film Thickness in Point
Contacts,” Journal of Tribology, Vol. 130, pp.
031501-1-6.
27. Ren, N, Nanbu, T, Yasuda, Y., Zhu, D., and Wang,
Q., 2007, “Micro
Textures in Concentrated Conformal-Contact Lubrication: Effect of
Distribution Patterns,” Tribology
Letters, Vol. 28, pp 275-285.
28. Wang, Q., Zhu, D., Zhou, R., and Hashimoto,
F., “Investigating the Effect of Surface Finish and Texture on Mixed
EHL of Rolling and Rolling-Sliding Contacts,” to appear in Tribology Transactions.
29. Liu, Y., Wang,
Q., Zhu, D., Wang, W., Hu, Y., “Effects
of Differential Scheme and Viscosity Model on Rough-Surface Point-Contact
Isothermal EHL,” to
appear in Journal of Tribology.
30. Zhang, Z., Liu, G., Liu, T., and Wang, Q,
“An Integrated Adaptive Element-Free Galerkin Model for Elasto-Plastic
Contact of Engineering Surfaces,” to appear in Tribology - Materials, Surfaces & Interfaces.
31. Liu,
Y, Wang, Q., Krupka, I, Hartl,
M, and Bair, S., 2008, “The Shear-Thinning Elastohydrodynamic Film
Thickness of a Two-Component Mixture,” Journal of Tribology,
Vol. 130, pp. 021502-1-7.
32. Martini,
A., Zhu, D., and Wang, Q., 2007, “Friction Reduction in Mixed
Lubrication,” Tribology Letters,
Vol 28, pp. 171-181.
33. Liu,
Y, Wang, Q., Bair, S., and Vergne, P., 2007,
“A Quantitative Solution for the Full Shear-Thinning EHL Point Contact
Problem Including Traction,” Tribology
Letters, Vol. 28, pp. 171-181
34. Chen,
W. W., Wang, Q., Liu, Y., Chen, W.,
Cao, J., Xia, C., Raj Talwar, and Rick Lederich, 2007, “Analysis and Convenient
Formulas for Elasto-Plastic Contacts of Nominally Flat Surfaces: Average Gap,
Contact Area Ratio, and Plastically Deformed Volume,” Tribology Letters, vol. 28, pp. 27-38.
35.
Chen,
W. W., Wang, Q., Wang, F., Keer, L. M., and Cao, J., 2008, “Three-Dimensional
Repeated Elasto-Plastic Point Contact, Rolling and Siding,” Journal of Applied Mechanics, Vol. 75,
021021-1-12.
36. Lichter,
S., Martini, A., Snurr, R., and Wang, Q., 2007,
“Liquid Slip as a Rate Process,” Physics Review Letters, Vol. 98, pp. 226001-4.
37. Chen, W. W., Liu, S.B., and Wang, Q.,
2008, “FFT-Based Numerical Methods for Elasto-Plastic Contacts of Nominally
Flat Surfaces,” Journal of Applied Mechanics, Vol. 75,
011022-1-11.
38. Jin,
X., Keer, L.M., and Wang, Q., 2008, “A Practical Method for Singular
Integral Equations of the Second Kind,” Engineering Fracture
Mechanics, Vol. 75, pp. 1005-1014.
39. Liu, S. and Wang, Q, 2007, “Determination of Young’s
Modulus and Poisson’s Ratio for Coatings,” Surface and Coating
Technology, Vol. 201, pp. 6470-6477.
40. Martini,
A., Velter, G., Keer, L.M., and Wang, Q., 2007,
“Maximum Stress Prediction for Rough, Sinusoidal and Textured
Surfaces,” Tribology Letters, Vol. 27, pp. 61-67.
41. Xie, Q., Liu, G., Liu, T., and Wang, Q., 2006,
“Elastic-Plastic
Contacts Analysis of Materials with Gradient Yield
Strength,” Materials Science Forum, Vol. 532-533, pp. 881-884.
42. Martini,
A., Liu, Y., Snurr, R., and Wang, Q., 2006, “Molecular
Dynamics Characterization of Thin Film Viscosity for EHL Simulation,” Tribology
Letters, Vol. 21, pp. 217-225.
43. Liu,
Y., Chen, W., Liu, S., Zhu, D., and Wang, Q., 2007, “An
Elastohydrodynamic Lubrication Model for Coated Surfaces in Point Contacts,”
Journal of Tribology, Vol. 129, pp. 509-516.
44. Liu,
S., Chen, W.W, Hua, D., and Wang, Q., 2007,
“Tribological Modeling: Application of Fast Fourier Transform,” Tribology International, Vol. 40, pp. 1284-1293.
45. Zhu,
D., Martini, A., Wang, W., Hu, Y., Lisowsky, B., and Wang, Q., 2007, “Simulation of
Sliding Wear in Mixed Lubrication,” Journal of Tribology, Vol. 129, pp. 544-552.
46. Karpov, E.G., Yu, H., Park, H.S., Liu, W., and Wang, Q.,
and Qian, D., 2006, “Multiscale Boundary
Conditions in Crystalline Solids: Theory and Application to
Nanoindentation,” International Journal of Solids and Structures,
Vol. 43, pp- 6359-6379.
47. Siniawski, M., Harris, S., and Wang, Q., 2007, “A
Universal Wear Law for Abrasion,” Wear, Vol. 262, pp. 883-888.
48. Liu,
Y., Wang. Q., Wang, W., Hu, Y.,
Zhu, D., Krupka, I.,
and Hartl, M., 2006, “EHL Simulation Using
the Free-Volume Viscosity Model,” Tribology Letters, Vol. 23,
pp. 27-37.
49. Martini,
A., Escoffier, B., Liu, S., Wang, Q., Keer, L., Zhu, D., and Bujold, M., 2006,
“Prediction of Subsurface Stress in Elastic Perfectly Plastic Rough
Components,” Tribology Letters, Vol. 23, pp. 243-251.
50. Xiong, S.,
Wang, Q., Liu, W. K., Yang, Q., Vaidyanathan, K.,
and Zhu, D., 2006, “Approaching Mixed Elastohydrodynamic Lubrication of
Smooth Journal-Bearing Systems with Low Rotating Speed,” Tribology
Transactions, Vol. 49, pp.598-610.
51. Liu,
T., Liu, G., Xie, Q., and Wang, Q., 2006, “A
Two-Dimensional Adaptive-Surface Elasto-Plastic Asperity Contact
Model,” ASME Journal of Tribology, Vol. 128, pp. 898-903.
52. Wang,
Y., Lin, C., Wang, Q., and Shi, F., 2006, “Development of a Set of Stribeck Curves for Conformal Contacts of Rough
Surfaces,” Tribology Transactions, Vol. 49, pp. 526-535. Reprinted in Tribology and Lubrication Technology as Editor’s Choice, Vol. 63, 4, pp. 32-40.
53. Bair,
S., Liu, Y. and Wang, Q., 2006, “The Pressure-Viscosity Coefficient for
Newtonian EHL Film Thickness with General Piezoviscous
Response,” ASME Journal of
Tribology, Vol. 128, pp. 624-631.
54. Liu,
Y., Wang, Q., Hu, Y., Wang, W., and Zhu, D., 2006,
“Effects of Differential Schemes and Mesh Density on EHL Film Thickness
in Point Contacts,” ASME Journal
of Tribology, Vol. 128, pp. 641-653.
55. Siniawski, M., Harris, S., and Wang, Q., 2005,
“Effects of Contact on the
Abrasiveness of a Thin Boron Carbide Coating,” Tribology Letters, Vol. 20, pp. 21-30.
56. Liu, T., Liu, G., Q. Xie, and Wang, Q., 2006, “An EFG-FE Coupling Method on Micro-Scale
Adhesive Contacts,” ASME
Journal of Tribology, Vol. 128, pp. 40-48.
57. Martini, A., Liu, S., and
Wang, Q., 2005, “Transient Three-Dimensional Solution for Thermoelastic
Displacement Due to Surface Heating and Convective Cooling,” ASME Journal of Tribology, Vol. 127, pp. 750-755.
58. Wang, Y, Wang, Q., and Lin, C., 2006,
“A Mixed-EHL Analysis of the Effects of Misalignments and Elastic
Deformations on the Performance of a Coupled Journal-Thrust Bearing
System,” Tribology International, Vol. 39, pp. 281-289.
59. Liu, T., Liu, G., and Wang, Q.,
2006, “An Element-Free Galerkin-Finite Element Coupling Method for
Elasto-Plastic Contact Problems,” ASME Journal of Tribology,
Vol. 128, pp. 1-9.
60. Liu, S. and Wang, Q., 2005, “Elastic
Fields Due to Eigenstrains in a Half-space,” ASME Journal of Applied Mechanics, Vol. 72, pp. 871-878.
61. Wang, Q. and Zhu, D., 2005, “Virtual
Texturing: Modeling the Performance of Lubricated Contacts of Engineered
Surfaces,” ASME
Journal of Tribology, Vol.
127, pp. 722-728.
62. Siniawski, M., T., Martini, A. Harris, S. J., and
Wang, Q., 2005, “Effects of Lubrication and Humidity on the
Abrasiveness of a Thin Boron Carbide Coating,” Tribology Letters, Vol. 18, pp. 185-195.
63. Liu, S., Peyronnel, A., Wang, Q., and Keer, L.M., 2005, “An
Extension of the Hertz Theory for 2D Coated Components,” Tribology
Letters, vol. 18, pp-505-511.
64. Liu, S., Peyronnel,
A., Wang, Q, and Keer, L., 2005, “An Extension of the Hertz Theory for
Three-Dimensional Coated Bodies,” Tribology Letters, vol. 18,
pp. 303-314.
65. Boucly, V., Nelias, D.,
Liu, S., Wang, Q., and Keer, L., 2005, “Contact Analyses for Bodies with
Frictional Heating and Plastic Behavior,” ASME Journal of Tribology, 127, pp. 355-364.
66. Jin, X., Keer, L. M., and Wang, Q., 2005,
“A Three Dimensional EHL Simulation of CMP: Theoretical Framework of
Modeling,” Journal of the Electrochemical Society, v 152, pp.
G7-G15.
67. Liu, S., Lannou,
S., Wang, Q., and Keer, L., 2004, “Solutions for Temperature Rise in
Stationary/Moving Bodies Caused by Surface Heating with Surface
Convection,” ASME Journal of Heat Transfer, Vol.
126, pp. 776-784.
68. Siniawski, M., Wang, Q., Harris, S. J., Chung, Y-W.,
and Freyman, C., 2004, “Effects of Thickness
and Roughness Variations on the Abrasiveness of a Thin Boron Carbide
Coating,” Tribology Letters,
Vol. 17, pp. 931-937.
69. Siniawski, M., Harris, S., and Wang, Q., 2004,
“Abrasiveness Control of a Thin Boron Carbide Coating Through
Counterpart Tempering,” Tribology
Letters, Vol. 17, pp. 939-946.
70. Dick, A., Lin, C., Wang, Y, and Wang, Q.,
2004, “Thermal Validation of a Misaligned Grease Lubricated Journal
Bearing Model,” Journal of Engineering Tribology, Proceedings of the Institution of Mechanical
Engineers Part J, Vol. 218, pp.
423-435.
71. Yu, H, Liu, S., Wang, Q., and Chung, Y-W.,
2004, "Influence of Temperature-Dependent Yield
Strength on Thermomechanical Asperity Contacts,” Tribology Letters, Vol. 17, pp. 155-163.
72. Liu, W., Xiong,
S., Guo, Y., Wang, Q., Wang, Y., Yang, Q., and Vaidyanathan, K., 2004, “Finite Element Method for
Mixed Elastohydrodynamic Lubrication of Journal-Bearing Systems,” International
Journal for Numerical Methods in Engineering, Vol. 60, pp. 1759-1790.
73. Ye, Z., Zhang, C., Wang,
Q., Cheng, H. S., Wang, Y., Tung, S, and X. He, 2004, "An Experimental
Investigation of Piston Skirt Scuffing: Piston Scuffing Apparatus,
Experiments, and Scuffing Mechanism Analyses," Wear, Vol. 257, pp. 8-31.
74. Wang, Q., Zhu, D., Yu, T., Cheng, H.S.,
Jiang, J., and Liu, S., 2004, "Mixed Lubrication Analyses by a
Micro-Macro Approach and a Full-Scale Micro EHL Model," ASME Journal
of Tribology, Vol. 126, pp
81-91.
75. Zhang, C., Wang, Q., and Cheng, H., 2004,
“Scuffing Behavior of Piston-Pin/Bore Bearing in Mixed Lubrication
– Part II: Scuffing Mechanism and Failure Criterion,” Tribology Transactions, Vol. 47, pp. 149-156.
76. Rodgers,
M, Liu, S., Wang, Q., and Keer, L. M., 2004, "Boundary Element Methods
for Steady-State Thermal-Mechanical Problems of Counterformal
Contact," ASME Journal of
Tribology, Vol. 126, pp. 443-449.
77. Epstein, E., Keer, L. M.,
Wang, Q., Cheng, H. S., and Zhu, D., 2003, "Effect of Surface Topography
on Contact Fatigue in Mixed Lubrication," Tribology Transactions,
Vol.46, pp.506-513.
78. Siniawski, M., Harris, S., and Wang, Q., 2003,
“Abrasiveness Variation in a Thin Boron Carbide Coating,” Tribology
Letters, Vol. 15, pp. 359-364.
79. Siniawski, M., Harris, S., and Krauss, G., Wang, Q.,
and Liu, S., 2003, “Wear Initiation in 52100 Steel Sliding against a
Thin Boron Carbide Coating,” Tribology Letters, Vol. 15, pp
29-41.
80. Epstein, D., Yu, T., Wang, Q., Keer, L. M.,
Cheng, H. S., Harris, S., and Gangopadhyay,
A., 2003, "An Efficient Method
of Analyzing the Effect of Roughness on Fatigue Life in Mixed-EHL
Contact," Tribology Transactions,
Vol. 46, pp. 273-281.
81. Liu,
S. Wang, Q., and Harris, S., 2003, "Surface Normal
Thermoelastic Displacement in Moving Rough Contacts," Journal of Tribology, Vol. 125, pp.
862-868.
82. Wang,
Y., Wang, Q., and Lin, C., 2003, "Mixed Lubrication of Coupled Journal-Thrust-Bearing Systems Including
Mass Conserving Cavitation," ASME Journal of Tribology, Vol. 125, pp. 747-755.
83. Liu,
S. and Wang, Q., 2003, "Transient Thermoelastic Stress Fields in a
Half-space," ASME Journal of Tribology, Vol. 125, pp. 33-43.
84. Wang,
Y., Wang, Q., and Lin, C., 2002, “Mixed Lubrication of Coupled
Journal-Thrust Bearing Systems,” Computer
Modeling in Engineering and Sciences, Vol. 3, pp. 517-530.
85. Wang,
Y., Zhang, C., Wang, Q., and Lin, C., 2002, “A Mixed-TEHD Analysis and
Experiment of Journal Bearings under Severe Operating Conditions,” Tribology International, Vol. 35, pp 395-407.
86. Liu,
G., Wang, Q., and Ao, Y., 2002, "Convenient
Formulas for Modeling Three-Dimensional Thermomechanical Asperity
Contact," Tribology International,
Vol. 35, pp. 411-424.
87. Liu,
S., Wang, Q., Rodgers, M., Keer, L.M., and Cheng, S. H., 2002,
"Temperature Distributions and Thermoelastic Displacements in Moving
Bodies,” Computer Modeling in
Engineering and Sciences,
Vol. 3, pp. 465-481.
88. Liu, S., and Wang, Q., 2002,
“Studying Contact Stress Fields Caused by Surface Tractions with
a Discrete Convolution and Fast Fourier Transform Algorithm," ASME Journal
of Tribology, Vol. 124, pp.
36-45.
89. Ao, Y., Wang, Q., and Chen, P., 2002, “Simulating
the Worn Surface in a Wear Process,” Wear, 252, pp.37-47.
90. Liu. G., Zhu, J., Yu, L. and Q. Jane Wang, 2001,
“Elasto-Plastic Contact of Rough Surfaces,” Tribology Transactions, Vol. 44, pp. 437-443.
91. Liu,
S. and Wang, Q., 2001, “A Three-Dimensional Thermomechanical Model of
Contact between Non-Conforming Rough Surfaces,” ASME Journal of Tribology, Vol. 123, pp.
17-26.
92. Liu,
G., Wang, Q., and Liu, S., 2001, “A Three-Dimensional
Thermal-Mechanical Asperity Contact Model for Two Nominally Flat Surfaces in
Contact,” ASME Journal of
Tribology, Vol. 123, pp. 595-602.
93. Liu,
S., Rodgers, M., Wang, Q. and Keer, L., 2001, “A Fast and Effective
Method for Transient Thermoelastic Displacement Analyses,” ASME Journal of Tribology, Vol. 123, pp.
479-685.
94. Harris,
S., Krauss, G., Siniawski, M., Wang, Q., Liu, S.,
and Ao, Y., 2001, “Surface Feature Variations
Observed in 52100 Steel Sliding against a Thin Boron Carbide Coating,” Wear, Vol. 249, pp. 1004-1013.
95. Chen,
G., Q. Wang, and Cao, Y., 2001, “A Tribological Experimental
Investigation of a Heat-Pipe Cooled Isothermal Journal Bearing,” Tribology Transactions, Vol. 44, pp.
35-40.
96. Liu,
S., Wang, Q., and, Liu, G., 2000, “A Versatile Method of Discrete
Convolution and FFT (DC-FFT) for Contact Analyses,” Wear, Vol. 243, pp. 101-111.
97. Liu, G. and Wang, Q., 2000, “Thermoelastic Asperity
Contacts, Frictional Shear, and Parameter Correlation,” ASME Journal of Tribology, Vol. 122, n1, 300-307.
98. Wang,
Q., Cao, Y., Wang, R., Mignano, F., and Chen, G.,
2000, “Studies of A Heat-Pipe Cooled Piston Crown,” ASME Journal of Engineering for Gas Turbines
and Power, Vol. 122, pp. 99-105.
99. Wang, Q. and Liu, G., 1999, “A Thermoelastic Asperity
Contact Model Considering Steady-State Heat Transfer,” Tribology Transactions, Vol. 42, pp.
763-770.
100.
Wang, Q., Chen, G., and Cao,
Y., 1999, “Analyses of Heat-pipe Cooled Isothermal Journal
Bearing,” ASME Journal of
Tribology, Vol. 121, pp. 546-552.
101.
Chen, G., Tso, C., Wang, Q., and Cao, Y., 1999, “Development
of an Isothermal Journal Bearing Employing Heat-Pipe Cooling
Technology,” Tribology
Transactions, Vol. 42, 401-406.
102.
Liu, G., Wang, Q., and Lin,
C., 1999, “A Survey of Current Models for Simulating the Contact between
Rough Surfaces,” Tribology
Transactions, Vol. 42, pp. 581-591.
103.
Chen, G. Wang, Q. and Cao, Y. 1999,
“Modeling the Heat-Source/Heat-Sink for Tribological
Applications,” Tribology
Transactions, Vol. 42, pp. 223-230.
104.
Shi, F. and Wang, Q., 1998, "A Mixed-TEHD
Model for Journal Bearing Conformal Contacts, Part I: Model Formulation and
Approximation of Heat Transfer Considering Asperity Contacts," ASME Journal of Tribology, Vol. 120, pp.
198-205.
105.
Shi, F. and Wang, Q., 1998, “A Method of
Thermal Influence Functions and Its Applications in
Tribological Studies,” Tribology
Transactions, Vol. 41, 350-358.
106.
Wang, Q., Shi, F. and Lee, S., 1998, "A
Mixed-TEHD Model for Journal Bearing Conformal Contacts, Part II: Contact,
Film Thickness, and Performance Analyses," ASME Journal of Tribology, Vol. 120, pp. 206-213.
107.
Ling, J., Cao, Y., and Wang, Q., 1998,
“Critical Working Frequency of Reciprocating Heat Pipes in Axially
Reciprocating Mechanisms,” International
Journal of Heat and Mass Transfer, Vol. 41, pp. 73-80.
108.
Wang, Q., 1997, “Seizure Failure of
Conformal Contacts,” Wear,
Vol. 210, pp. 8-16.
109.
Wang, Q., Shi, F., and Lee,
S., 1997, "A Mixed-Lubrication
Study of Journal Bearing Conformal Contacts," ASME Journal of Tribology, Vol. 119, pp.
456-461.
110.
Ling, J., Cao, Y., and Wang,
Q., 1996, “Experimental Investigations and Correlations for the
Performance of Reciprocating Heat Pipes,” Heat Transfer Engineering, Vol. 17, pp. 34-45.
111.
Wang, Q. and Cao, Y., 1996, “Oscillatory
Impingement of Liquid Inside Reciprocating Pipes,” Journal of Sound and Vibration, 197, pp. 619-628.
112.
Wang, Q., Cao, Y., and Chen, G. 1996,
“Piston Assembly Design for Improved Thermal-Tribological
Performance,” Tribology
Transactions, Vol. 39, pp. 483-489.
113.
Wang, Q. and Cheng, H. S., 1995, "A Mixed
Lubrication Model for Journal Bearings with a Soft Coating, Part I: Contact
and Lubrication Analysis," Tribology
Transactions, Vol. 38, pp. 654-662. (Captain
Alfred E. Hunt Best Paper Award)
114.
Wang, Q. and Cheng, H. S., 1995 "A Mixed
Lubrication Model for Journal Bearings with a Soft Coating, Part II: Flash
Temperature Analysis and Its Application to Tin Coated Al-Si Bearings," Tribology Transactions, Vol. 38, pp.
517-524. (Captain Alfred E. Hunt Best
Paper Award)
115.
Cao, Y. and Wang, Q., 1995,
“Reciprocating Heat Pipes and Their Applications,” ASME Journal of Heat Transfer, Vol. 117,
pp. 1094-1096.
116.
Cao, Y. and Wang, Q., 1995, “Thermal
Analysis of the Piston Cooling System with Reciprocating Heat Pipes,” Heat Transfer Engineering, Vol. 16,
pp. 50-57.
117.
Wang, Q., Cheng, H. S., and Fine, M. E., 1994,
"Frictional Behaviors of Some Nitrogen Ceramics in Conformal Contact with Tin Coated Al-Si
Alloy, Steel, and MMC," Tribology Transactions, Vol. 37, pp.
587-593.
118.
Wang, Q., Cheng, H. S., Caracostas,
C. A., and Fine, M. E., 1994, "Wear of Metal Matrix Composites in
Lubricated Conformal Contact with Case Hardened Steel," Tribology Transactions, Vol. 37, pp.
735-742.
119.
Wang, Q., Cheng, H. S., and Fine, M. E., 1994,
"Wear of Tin Coating and Al-Si Alloy Substrate Against Carburized Steel Under
Mixed Lubrication," Tribology
Transactions, Vol. 37, pp. 277-284.
ARTICLES
120.
Bryant,
M. D, Blanchet, T., Wang, Q., Ovaert, T., Erdemir,
A., Fanske, G., Poeppel,
R., and Ebrahim, T., 2003, “Research
Workshop: Tribology Issue in Biology and Medicine,” Journal of
Tribology, Vol. 125, pp. 217-222.
121.
Wang, Q., Bryant, M. D., Keer, L.M., Salant, R.F., 2002, “Virtual Tribology: Integrating Model-Based Simulations with Modern
Computation/Information Technologies,” Computer Modeling in Engineering and Sciences, Vol. 3,
pp.417-429.
122.
Bair, S., Femandez,
J., Khonsari, M., Krupka,
I., Qureshi, F., Vergne, P., and Wang, Q., 2009, “Letter to the Editor,
An Argument for a Change in Elastohydrodynamic Lubrication Philosophy,”
Journal of engineering Tribology,
Proceedings of IMechE, vol. 223, pp1-2.
Selected Proceedings
1.
Kim, W.-S. and Wang, Q., “Numerical
Computation of Surface Melting at Imperfect
Electrical Contact between Rough Surfaces,” Proceedings of the
2006 IEEE Holm Coneference, pp. 81-88.
2.
Wang,
F., Keer, L., Martini, A., and Wang, Q., “Simulation and Analysis of
Contact Pressure and Subsurface Stress and Strain fields in Elastic-Plastic
Rough Contacts,” Recent Advances in Structural Engineering, Mechanics
of Materials, Proceedings of the 10th East Asia-Pacific
Conference on Structural Engineering and Construction, pp. 11-20.
3.
Kim,
W.-S., Wang, Q., Liu, S., and Asta, M.,
“Simulation of Steady and Unsteady Surface Temperatures under Sliding
Imperfect Electrical Contact between Rough Surfaces,” Proceeding of
the 23rd International Conference on Electric Contacts, pp.
226-231.
4.
Wang, Q., 2005, “Model-Based Virtual Surface Texturing,” Proceedings
of the COST 532 Porto Conference, pp.
26-35.
5.
Wang,
Q., 2004, “Contact, Mixed Lubrication, and Failure of Engineering
Surfaces and Design of Journal Bearing Systems,” Proceedings of the 3rd
EDF/LMS Poitiers
Workshop, pp.
1-19.
6.
Zhu,
D., Wang,
Q., Liu, S., and Martini, A., 2003, “A transient contact stress
analysis for mixed-EHL of rough surfaces, stress filed animation, and a virtual
texturing technology,” Contact Mechanics - Friction: Modeling and
Experiment, 2003, pp 93-98.
7. Epstein, D, Wang, Q., Keer, L.M., Cheng, H.S., Zhu, D., Harris,
S., and Gangopadhyay, A., 2003 “A
Macro-Micro-Fatigue Approach for Predicting Fatigue Life in Mixed-EHL
Contact,” Proceedings of the 29th Leeds-Lyon Symposium,
2002, Leeds, pp. 835-844.
8. Ao, Y., Wang,
Q., and Chen, P., 1999, “A New Method of Surface Study,” Proceedings
of the 1999 STLE/ASME H. S. Cheng Tribology Surveillance, STLE
publication, pp. 72-78.
9. Cao,
Y., Ling, J., and Wang, Q., 1996, “Analytical and Experimental
Investigation for the Critical Working Frequency of Reciprocating Heat Pipes
with Piston Cooling Application,” 1996 AIChE
Heat Transfer Annual Meeting, ASME HTD, Vol. 92, pp. 317-323.
10. Wang, R., Mignano, F., Wang, Q., and
Cao, Y., 1998 “Development of a Diesel-Engine Piston by Incorporating
Heat-Pipe Cooling Technology -A FEM Modeling of A Simulated Piston
Crown,” SAE Technical Paper No. 981043.
|